I understand that the 5V signals going into an X-Bee Adapter are level shifted to 3.3 to protect the X-Bee from e.g. an Arduino UNO, which I have working now.
How should I hook up the adapter to work with the Arduino DUE operating at 3.3 Volts and make sure the DUE doesn't get fried?
GND-GND RX-TX TX-RX and 3.3V to 3V on the adapter (bypassing the regulator), or supply 5V to the adapter and count on it to shift all the levels down?
X-Bee Adapter and 3.3 Volt Processors
Moderators: adafruit_support_bill, adafruit
3 posts • Page 1 of 1
X-Bee Adapter and 3.3 Volt Processors
by sellensr » Tue Dec 11, 2012 10:37 pm
- sellensr
- Posts: 13
- Joined: Tue Nov 06, 2012 8:41 pm
Re: X-Bee Adapter and 3.3 Volt Processors
by adafruit_support_bill » Wed Dec 12, 2012 6:18 am
3.3V to 3V on the adapter (bypassing the regulator), or supply 5V to the adapter
Either way will work.
-
adafruit_support_bill - Posts: 16023
- Joined: Sat Feb 07, 2009 9:11 am
Re: X-Bee Adapter and 3.3 Volt Processors
by sellensr » Fri Dec 14, 2012 12:10 pm
Two correct answers are always the hardest to pick between
- sellensr
- Posts: 13
- Joined: Tue Nov 06, 2012 8:41 pm
3 posts • Page 1 of 1
Return to XBee products from Adafruit
Who is online
Users browsing this forum: No registered users and 3 guests
Stuff to buy from the Adafruit store and links to product documentation!
New Products [103]
Raspberry Pi[80]
FLORA[23]
Bunnie Studios[9]
FPGA[1]
mbed[11]
Arduino[60]
NETduino[14]
BeagleBone[24]
Android[6]
XBee[10]
More Dev Boards[30]
BoArduino[8]
SpokePOV[4]
TV-B-Gone[4]
MiniPOV[3]
SIM reader[3]
Microtouch[5]
Clocks & Watches[18]
Drawdio[4]
Brain Machine[1]
Game of Life[2]
MintyBoost[2]
More DIY Kits[16]
MaKey MaKey[3]
Tweet-a-Watt[5]
Young Engineers[33]
Discover Electronics[2]
Snap Circuits[4]
littleBits[3]
Project packs[8]
Breakout Boards[33]
LCDs & Displays[48]
Components & Parts[69]
Batteries & Power[49]
EL Wire/Tape/Panel[52]
LEDs[109]
Wireless[14]
Cables[61]
Lasers[6]
Sensors/Parts[145]
Enclosures/Cases[11]
Solar[11]
RFID / NFC[13]
Prototyping[70]
iDevices[13]
Tools[71]
Wearables[39]
CNC[37]
Robotics[29]
3D printing[1]
Materials[24]
Stickers[41]
Skill badges[55]
Books[25]
Circuit Playground[7]
Gift Certificates[4]
Raspberry Pi[80]
Displays [12]
Books [3]
Cables [12]
Accessories [10]
Boards & Packs [6]
Prototyping [7]
Cases [15]
Essentials [15]
Arduino[60]
More Dev Boards[30]
More DIY Kits[16]
LCDs & Displays[48]
Character [12]
VFD [2]
Graphic TFT [6]
HDMI/VGA/NTSC/PAL Displays [3]
Other [1]
OLED [5]
Graphic LCD [6]
eInk / ePaper [3]
NTSC/PAL TFTs [7]
Graphic LED [3]
Heat Sinks [4]
Passives [5]
Storage [7]
Sockets/Connectors [8]
IC & Transistors [13]
Other [14]
Header [6]
Switches & Buttons [12]
Cables & Adapters [13]
LiIon & LiPoly [8]
Wall Adapters [6]
Power Converters [4]
Battery Holders [11]
Power Switch [3]
Batteries [4]
EL Wire [12]
Flowing EL Wire [3]
Flowing USB Cables [6]
EL Starter Packs [5]
EL Tape [8]
EL Panel [5]
Inverters & Extras [13]
Cables[61]
Sensors/Parts[145]
Biometric [3]
Buttons & Switches [39]
Radiation / Geiger [2]
Liquid/Flow [4]
Barometric / Pressure [2]
Money / Coin [2]
Sound [2]
Location (GPS) [6]
Camera [2]
Movement [6]
Touch [22]
Temperature [17]
Light/Photo [6]
Humidity [6]
Proximity [17]
Other [9]
Prototyping[70]
Tools[71]