sending serial commands to multiple ZB nodes from coordinator

XBee projects like the adapter, xBee tutorials, tweetawatt/wattcher, etc. from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
kjones.unltd
 
Posts: 10
Joined: Tue Oct 02, 2012 4:56 pm

sending serial commands to multiple ZB nodes from coordinator

Post by kjones.unltd »

i'm trying to send a serial command to multiple nodes on the same pan id network. i can send the serial command to the individual nodes by setting the destination address of the node on the coordinator using X-CTU but i'm not sure on how to send a single serial command to 2 or more nodes VIA the coordinator. the 2 nodes are connected to 2 unos r3 with zigbee shields and the coordinator is connected to a mega r3 with zigbee shield

i've tried putting the coordinator in AT and API mode but still no luck. i'm hoping it something simple

any help would be appreciated

K Jones

ps i also have this posted on the digi forums but i thought i'd ask here also

Locked
Please be positive and constructive with your questions and comments.

Return to “XBee products (discontinued)”