Edit - it is normal, ignore this post.
Is this normal, I noticed some white flaky looking stuff a few days ago, or perhaps I am just noticing it more. It does make the first few digits look a bit different from the front, but I am obscenely detail oriented.
Large Size: http://www.smugmug.com/photos/764528646_viKNZ-O.jpg
White Getter on back of the display tube [pebkec error]
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- billmorton
- Posts: 19
- Joined: Tue Dec 22, 2009 9:56 am
White Getter on back of the display tube [pebkec error]
Last edited by billmorton on Fri Jan 15, 2010 3:05 pm, edited 1 time in total.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: White corrosion on back of the display tube
thats the getter, it SHOULD be like that!
http://www.ladyada.net/make/icetube/parts.html
http://www.ladyada.net/make/icetube/parts.html
It is normal for the tube to have a black 'spot' on the back and white 'paint' on the back of the display.
- billmorton
- Posts: 19
- Joined: Tue Dec 22, 2009 9:56 am
Re: White corrosion on back of the display tube
Foiled by the parts list, but I learned something new:adafruit wrote:thats the getter, it SHOULD be like that!
http://www.ladyada.net/make/icetube/parts.htmlIt is normal for the tube to have a black 'spot' on the back and white 'paint' on the back of the display.
wikipedia wrote: A getter is a reactive material used for removing traces of gas from vacuum systems, such as vacuum tubes. Residual gas can be left in vacuums by inadequate vacuum pumps, or adsorbed gasses can be released after evacuation by the inner surfaces of the container. The getter is usually a coating applied to a surface within the evacuated chamber. When molecules of residual gas strike the getter surface they chemically combine with the material, removing them from the evacuated space.
Please be positive and constructive with your questions and comments.