Monochron: 5V, but no beeps

[eggplantǃ]

Stuck at the beep test. The 5V test passes fine (steady 5.05V) but I get no beeps at the beep test. I looked over my parts and solder joints and don't see anything obvious to my untrained eye. Took some pictures (click through for big versions). Any suggestions?

[adafruit]

that does sound suspicious BUT since the voltage is OK we suggest continuing anyways. see if the display comes up. if you built and theres no display, email support@adafruit and ask for a new chip!

[eggplantǃ]

I shall solder on!

(very sorry about that one)

[eggplantǃ]

Welp,

I soldered everything else up. The LED and switch work, the LCD appears to work (if I turn the pot all the way I see all the pixels glow), I checked the 5V power one more time and it appears to be fine. Still no beeps and no animation on the display. Bad chip you think?

[adafruit]

email support@adafruit and ask for a new chip

[eggplantǃ]

Just a followup--

I received my replacement chip today, and everything works great! Thanks!