Ice tube clock will not set

by Locke on Wed Sep 12, 2012 7:56 pm

Only the middle "set" switch works. The menu and + switch do not work. I re-re-re-re-re soldered all the points for all three switches with no change in the results. A second one worked just long enough for me to almost set the time. It is keeping time I just cant set it.

You can see my board at the link below

http://www.flickr.com/photos/87154453@N04/
Locke
 
Posts: 1
Joined: Wed Sep 12, 2012 6:57 pm

Re: Ice tube clock will not set

by neutron spin on Wed Sep 12, 2012 8:57 pm

A closeup would be better but it looks like the right two switches look a little solder starved. The "mounting tabs" seem to look fine but the "switches" look suspect.
neutron spin
 
Posts: 163
Joined: Sat Apr 03, 2010 5:11 pm

Re: Ice tube clock will not set

by adafruit_support_bill on Thu Sep 13, 2012 4:36 am

Yes. A larger image showing the center portion of the board with switches would be good.
User avatar
adafruit_support_bill
 
Posts: 28160
Joined: Sat Feb 07, 2009 9:11 am