You may have a tube that does not have 3 not-connected wires. in this case, the spacing will be different in front and you'll see two wires that seem 'farther' than the others. They are right in the front of the tube and are the two pins in the 'middle' of the front plate (which has 4 connections). Make sure you have identified the correct wires, please click the photos to the left to see larger detailed images as its much easier to see than explain.
I've rechecked the voltage between ground and the positive side of D3 and where there previously was 59v, there's now around 13v
Users browsing this forum: No registered users and 1 guest