I have a bunch of cut tape feeders, but they're kind of a pain for small lightweight parts like 0603 resistors, since they pop out easily when you advance a neighbouring tape, etc. You're much better off putting those in proper reels. The cut tape feeders work great for SOT32, XTALs, etc., though, or ICs on 12mm parts (thin QFNs, etc.) if you also have 12mm feeders.
Isono san (Isozee here on the forum) at MDC sent me this video on youtube showing a prototype of a new auto-advancing mechanism for the cut tape feeders that looks really interesting, since it solves the problem of having to change reels for one-off parts (and purchase reels in the first place), without the hassle of parts falling out since you have to pull the tape back a few components and manually advance the tape, etc. Looks like a great compromise, since most of us can't afford to buy 30-40 8mm reels, but no one wants to be manually advancing tape for 10-20 parts either.
http://www.youtube.com/watch?v=0qksOZ2RwR0
MDC Auto Advancing Cut Tape Feeder
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- alphatronique
- Posts: 231
- Joined: Fri Jun 25, 2010 8:30 am
Re: MDC Auto Advancing Cut Tape Feeder
Hi
interesting it use similar cover tape flipping as in mydata agilis feeder
but i curious to see if it work whit tape that use blue gummy glue
and how hard it for initial setup ? like what happen if tape peel of completely
interesting it use similar cover tape flipping as in mydata agilis feeder
but i curious to see if it work whit tape that use blue gummy glue
and how hard it for initial setup ? like what happen if tape peel of completely
-
- Posts: 43
- Joined: Tue Nov 24, 2009 5:59 am
Re: MDC Auto Advancing Cut Tape Feeder
Cool, now if the software could be fixed not to suck, it'd be even better. Oh, wait...
-
- Posts: 6
- Joined: Tue Aug 30, 2011 4:08 am
Re: MDC Auto Advancing Cut Tape Feeder
oh, i'm looking forward to testing it myself! wanna install it on both my pcsAlphatronique wrote:Hi
interesting it use similar cover tape flipping as in mydata agilis feeder
but i curious to see if it work whit tape that use blue gummy glue
and how hard it for initial setup ? like what happen if tape peel of completely
Please be positive and constructive with your questions and comments.