Hi,
I'm new to Arduino projects and was hpoing you would suggest a pc board holder?
Thanks
Mike
PC Board holder
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- kkinderen
- Posts: 13
- Joined: Fri Dec 09, 2011 9:55 pm
Re: PC Board holder
I like the PanaVise options. I have one large base and can swap in two different heads as needed. I have the model 350 (base & vise) and swap in a 203 vise depending on the board I'm working on.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: PC Board holder
I have a few different ones. But the one that gets used the most is the Panavise Jr.. It is for most small-to-medium sized boards, including Arduino shields.
- flapjackboy
- Posts: 21
- Joined: Wed Feb 17, 2010 1:05 pm
Re: PC Board holder
I got the Dremel Multivise. It's got a nice sturdy base that clamps to the side of your workbench and the vise section can be removed and used as a clamp or used freestanding on your bench. The base also comes with an adapter ring that holds your Dremel (or other branded Dremel-like tool).
Please be positive and constructive with your questions and comments.