Hi,
In general I was looking to find out what type of solder and flux to use for my Arduino projects. I hear lead free is good. And I hear liquid flux is good but that you should clean the residue off with rubbing alcohol afterwards.
Thanks
What type of solder and flux does Adafruit recommend
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 27
- Joined: Sun Apr 15, 2012 11:15 pm
- adafruit_support_bill
- Posts: 88088
- Joined: Sat Feb 07, 2009 10:11 am
Re: What type of solder and flux does Adafruit recommend
The 60/40 rosin core solder is the one we use. It is easy to work with, and requires no cleanup.
If you live in an area where leaded solder is banned entirely, we also have lead-free rosin core solder.
If you live in an area where leaded solder is banned entirely, we also have lead-free rosin core solder.
-
- Posts: 27
- Joined: Sun Apr 15, 2012 11:15 pm
Re: What type of solder and flux does Adafruit recommend
Thanks,
How often should I use tip cleaner on an iron?
How often should I use tip cleaner on an iron?
- Franklin97355
- Posts: 23910
- Joined: Mon Apr 21, 2008 2:33 pm
Re: What type of solder and flux does Adafruit recommend
Depends on what you mean by tip cleaner. I use one of those copper "pot scrubber things and clean the iron when it gets burned on flux residue (every 20 minutes or so depending on the amount of soldering I am doing) I clean again before putting the iron away and flood the tip with solder as I turn it off.How often should I use tip cleaner on an iron?
Please be positive and constructive with your questions and comments.