DSO Nano v3 (keeps rebooting)

Hand tools, soldering irons, scopes, multimeters. Talk about em HERE!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
ericg2
 
Posts: 2
Joined: Fri Feb 08, 2013 8:27 am

DSO Nano v3 (keeps rebooting)

Post by ericg2 »

Hi, I recently purchased the DSO Nano v3 http://www.adafruit.com/products/468 and it keeps rebooting, sometimes i can get a few minutes out of it, and sometimes i can only get 10 seconds out of it before it reboots, is there a way to fix this? I make sure the on switch is all the way on and my hand is not interfering with it. Thanks!

User avatar
adafruit_support_mike
 
Posts: 67454
Joined: Thu Feb 11, 2010 2:51 pm

Re: DSO Nano v3 (keeps rebooting)

Post by adafruit_support_mike »

That's a new one by me..

For the sake of "it can't hurt and might help," try updating the firmware according to the instructions in the product wiki: http://www.seeedstudio.com/wiki/DSO_Nan ... e_firmware

If that doesn't help, send a message to [email protected] with a link to this thread and we'll get you a replacement.

User avatar
ericg2
 
Posts: 2
Joined: Fri Feb 08, 2013 8:27 am

Re: DSO Nano v3 (keeps rebooting)

Post by ericg2 »

I went to the link you gave me and installed 2 different firmwares: DSO Nano Official Firmware App2.6, BenF Firmware v3.64. The 2.6 version seem to help, i got a few minutes out of it, but it still reboots in the middle of using the oscilloscope, usually when i press the left arrow button. Thanks for your time and help, i'll email [email protected]

Locked
Please be positive and constructive with your questions and comments.

Return to “Tools Tools Tools”