Hole Punch

Hand tools, soldering irons, scopes, multimeters. Talk about em HERE!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
swalker2001
 
Posts: 1
Joined: Mon Aug 25, 2014 5:55 pm

Hole Punch

Post by swalker2001 »

I need to make some holes in a panel to mount switches such as the 16mm Illuminated Pushbutton - Red Momentary PRODUCT ID: 1439.

Is there a hole punch (such as those made by Greenlee) for this model? It has two flat sides that would indicate this might be available. If not, what is the hole size I need to try and drill to mount this switch?

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: Hole Punch

Post by adafruit_support_bill »

These need a 16mm hole. A Greenlee 5/8" may be close enough, but I don't have one to test.
Image

User avatar
neslekkim
 
Posts: 61
Joined: Tue Apr 24, 2012 4:20 am

Re: Hole Punch

Post by neslekkim »


Locked
Please be positive and constructive with your questions and comments.

Return to “Tools Tools Tools”