I have the Adafruit .lbr file and couldn't find it in there.
Is there somewhere else I can find an Eagle library for these parts? I've kind of cobbled it together from a 20 pin header and some lines, but, it would be really nice to have the ability to move it all around as a single unit which means a library entry.
I suppose I can build a library part if I have to, but, my skills with the Eagle library editor are painful at best.
Thanks,
Owen
Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- owendelong
- Posts: 78
- Joined: Fri Feb 10, 2012 4:25 am
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
there is no library part for the entire PCB assembly
- owendelong
- Posts: 78
- Joined: Fri Feb 10, 2012 4:25 am
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
There is now, though I won't guarantee it has all the right stuff in all the right layers.
Let me know if you'd like a copy.
Let me know if you'd like a copy.
-
- Posts: 37
- Joined: Wed Feb 09, 2011 11:58 pm
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
I would like a copy please!!
- helium
- Posts: 40
- Joined: Thu May 30, 2013 8:23 pm
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
I would very much like a copy of the eagle part also.
- owendelong
- Posts: 78
- Joined: Fri Feb 10, 2012 4:25 am
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
As much as I would like to help the individuals who replied asking for a copy, I don't really have a way to get it to you through this forum.
Primarily, I was asking Adafruit to let me know if they wanted a copy for inclusion into their own libraries. So far, they have not requested such.
Primarily, I was asking Adafruit to let me know if they wanted a copy for inclusion into their own libraries. So far, they have not requested such.
- helium
- Posts: 40
- Joined: Thu May 30, 2013 8:23 pm
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
Ok, that's what I had thought but it didn't hurt to ask
I'm designing a custom PCB with the TFT shield and need the screen perfectly centered in the center of the PCB, so that's what I needed it for.
If you have a Dropbox account, you could make a public folder and drop the file into there, and then post the link?
I'm designing a custom PCB with the TFT shield and need the screen perfectly centered in the center of the PCB, so that's what I needed it for.
If you have a Dropbox account, you could make a public folder and drop the file into there, and then post the link?
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Eagle Library Part for 2.8" TFTLCD Breakout and Shield?
You can attach files to a post here in the forum.. it's the 'Upload attachment' tab below the box where you compose a message.
There's a limit on file size (a megabyte or so IIRC), but you shouldn't have too much trouble with a zipped library. If necessary, make a new library just for the parts you've created, and you can attach that.
There's a limit on file size (a megabyte or so IIRC), but you shouldn't have too much trouble with a zipped library. If necessary, make a new library just for the parts you've created, and you can attach that.
Please be positive and constructive with your questions and comments.