Just got my display and does not seem to be working.
Do not get any picture on it what so ever.
Backlight goes on, led on push buttons come on, no picture other buttons bring up anything on screen.
Have tried with Rasbbey Pi, BeagleBlack, and windows computer. Using the 9v 1000ma power supply that came with it.
Thanks!
HDMI/VGA/NTSC/PAL Display 10.1
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- waldozer
- Posts: 3
- Joined: Thu May 16, 2013 7:27 am
Re: HDMI/VGA/NTSC/PAL Display 10.1
Bump.
Still waiting for a response direction... Please....
Still waiting for a response direction... Please....
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: HDMI/VGA/NTSC/PAL Display 10.1
Have you cycled through the input options? You may be seeing the VGA screen when you're supplying a NTSC signal.
The 'INPUT' button should switch from one signal to the next.
The 'INPUT' button should switch from one signal to the next.
- waldozer
- Posts: 3
- Joined: Thu May 16, 2013 7:27 am
Re: HDMI/VGA/NTSC/PAL Display 10.1
Yes. Have tried pushing all buttons
tried cycling thru, and als0 tried different input methods. HDMI & VGA.
Don't get anything on screen when pushing buttons.
tried cycling thru, and als0 tried different input methods. HDMI & VGA.
Don't get anything on screen when pushing buttons.
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: HDMI/VGA/NTSC/PAL Display 10.1
Hmm.. if you don't even get anything from the MENU button, it's good evidence of a hardware issue. Send a note to [email protected] with a link to this thread and we'll get you a replacement.
Please be positive and constructive with your questions and comments.