Hi I was wondering if this LED square pushbutton can support a 3 legged or 3 pin bi colour LED or can it only use 2 legged LEDs
http://www.adafruit.com/products/491
Any and all help would be great thanks
LED Square Pushbutton
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: LED Square Pushbutton
The included lampholder only has 2 terminals, so you would have to improvise the connections. But there is plenty of room in there for an RGB led.
-
- Posts: 7
- Joined: Sun Jul 29, 2012 11:23 pm
Re: LED Square Pushbutton
Thats good to know. what is the maximum size LED that can fit in the lamp holder. And with this button do you sell the wire connectors that are in the picture
http://www.adafruit.com/products/1443
- Daniel
http://www.adafruit.com/products/1443
- Daniel
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: LED Square Pushbutton
I'll have to check on the measurements. The quick-connects are sold separately: http://www.adafruit.com/products/1152
-
- Posts: 7
- Joined: Sun Jul 29, 2012 11:23 pm
Re: LED Square Pushbutton
Do you have any circular led momentary push buttons that you can change the colour of the led similar to the square push buttons aforementioned
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: LED Square Pushbutton
Yes we do: http://www.adafruit.com/products/492
The plastic lamp insert will hold up to a 5mm led. But with the insert removed, you could fit a 10mm led in there.
The plastic lamp insert will hold up to a 5mm led. But with the insert removed, you could fit a 10mm led in there.
-
- Posts: 7
- Joined: Sun Jul 29, 2012 11:23 pm
Re: LED Square Pushbutton
How long do these switches bounce for
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: LED Square Pushbutton
I haven't run tests on these particular switches. But with this type of switch I generally allow a 2ms debounce window.
-
- Posts: 7
- Joined: Sun Jul 29, 2012 11:23 pm
Re: LED Square Pushbutton
Well if you run some tests let me know the results
But otherwise these sound perfect for what I need
But otherwise these sound perfect for what I need
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: LED Square Pushbutton
Putting one on the scope here, I'm seeing between 1400 and 1700uS, of bounce on the close. About 5-600us on the open. So 2ms should take care of it.
Please be positive and constructive with your questions and comments.