I recently purchased the 1.5" OLED display and had a few questions about interfacing with it. First off, are there any open schematics or board files associated with the board? I was also reading through some of the documentation and noticed that the CD pin didn't appear to be used. What is its purpose and is it OK to leave it NC?
I also noticed that the SSD1351 Library Download link on the product's associated tutorial seems to be the LiPoly charger schematic once downloaded.
Thanks for the help!
1.5" OLED Display Questions
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88151
- Joined: Sat Feb 07, 2009 10:11 am
Re: 1.5" OLED Display Questions
I've corrected the library link on the downloads page. I believe that the CD pin is the card-detect for the SD card. It is not an essential connection. I'll see if I can track down the board files.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Please be positive and constructive with your questions and comments.