12mm Diffused Flat Digital RGB LED Pixels (Strand of 25) - D

EL Wire/Tape/Panels, LEDs, pixels and strips, LCDs and TFTs, etc products from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
SMonNET
 
Posts: 1
Joined: Fri Dec 20, 2013 12:36 pm

12mm Diffused Flat Digital RGB LED Pixels (Strand of 25) - D

Post by SMonNET »

Hi all,
i would like to build an Adalight-Frame with these Alu-Profiles:
http://www.led-emotion.de/de/LED-Eck-Pr ... ckung.html
Tech-Details say:
12mm diameter (0.45") 23mm deep (0.9") from the top of the LED to the back of the rubber

Question: I need to know the Base-Pad-Dimensions of the Plastic-Cover of an RGB LED Pixel to ensure, that i can place the whole part within the Alu-Corner-Profile 30x30mm, that has space on the inside of 20mm width.

Thanks,
SMonNET

User avatar
adafruit_support_bill
 
Posts: 88088
Joined: Sat Feb 07, 2009 10:11 am

Re: 12mm Diffused Flat Digital RGB LED Pixels (Strand of 25)

Post by adafruit_support_bill »

They appear to be designed to fit into a 12mm hole in a 2mm panel. There is a ~11mm dia seat with a ~13mm flange behind it and some nubs in front to lock it in place (max dia. ~13mm). Measurements are approximate because the material is molded silicone.

Locked
Please be positive and constructive with your questions and comments.

Return to “Glowy things (LCD, LED, TFT, EL) purchased at Adafruit”