ID 1694 10.1 LCD Display
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- falconsfan
- Posts: 6
- Joined: Tue Feb 11, 2014 7:26 pm
ID 1694 10.1 LCD Display
Hi, I'm just wondering if you can tell me what the actual viewing angle is on this display? "great angle-visibility" in the description doesn't really help me. 45° 70° 90° 170° I'm only asking because this will be my third display now that I've purchased and the other two that I purchased (not from adafruit) have HORRIBLE viewing angles. There are very few 10 inch displays that are good that are available like this that include a driver board and have a hdmi input. I'm running out of options here. Unless you guys can come up with a hdmi driver board for the retina display. (hint, hint)
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: ID 1694 10.1 LCD Display
What viewing angle do you need?
- falconsfan
- Posts: 6
- Joined: Tue Feb 11, 2014 7:26 pm
Re: ID 1694 10.1 LCD Display
Hi, idk Ideally 170 would be great but I think 130+ would work for what I need.
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: ID 1694 10.1 LCD Display
I did some digging around in the datasheets, and found a specification of 89 degrees typical, vertical and horizontal: http://www.adafruit.com/datasheets/HSD101PWW1.pdf (page 6)
Sorry.
Sorry.
- ortsac
- Posts: 34
- Joined: Tue Jul 19, 2011 5:32 pm
Re: ID 1694 10.1 LCD Display
I just bought this product. Is there an English version for Video Driver board for this LCD? It's all in Chinese....Please help.
Thanks!!
Thanks!!
- Franklin97355
- Posts: 23910
- Joined: Mon Apr 21, 2008 2:33 pm
Re: ID 1694 10.1 LCD Display
That is all we have. What are you wanting to know?
- ortsac
- Posts: 34
- Joined: Tue Jul 19, 2011 5:32 pm
Re: ID 1694 10.1 LCD Display
Thanks for the reply....What are the pinmaps of all the connectors on the board? What are the minimum and maximum signal (voltage and current) that can drive them or output from them?
- ortsac
- Posts: 34
- Joined: Tue Jul 19, 2011 5:32 pm
Re: ID 1694 10.1 LCD Display
I bought one of this display lay year. Does Adafruit plan on offering an enclosure/case for the LCD and its electronics in the near future? Or does anyone know someone that sells the enclosures?
Please be positive and constructive with your questions and comments.