Hi,
I'm working on drawing a board that will integrate the Nokia 5110 screen from the Adafruit Store. I'd like to just simply push it into a pair of sockets (one for the top, one for the bottom) on the board. Is there anywhere I can get a footprint (eagle or otherwise) appropriate for the screen? Just something with the Board Edges, mount holes, and pin positions would work perfectly.
Nokia 5110 Footprint
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: Nokia 5110 Footprint
We don't have any footprint or specs or eagle files or PCB files or dimensional drawings, sorry! It's a low-cost breadboard-friendly LCD, you could try googling around in case something comes up, let us know if you find anything!
- LMcCallister
- Posts: 20
- Joined: Sun Jun 15, 2014 7:23 pm
Re: Nokia 5110 Footprint
Welp, a little time with some calipers and some common sense, and I've made this footprint for eagle:
https://dl.dropboxusercontent.com/u/133 ... IA5110.lbr
I've printed it on paper, and it seems to match up pretty well with my screen. Your Mileage May Vary.
https://dl.dropboxusercontent.com/u/133 ... IA5110.lbr
I've printed it on paper, and it seems to match up pretty well with my screen. Your Mileage May Vary.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Nokia 5110 Footprint
Thanks!
Please be positive and constructive with your questions and comments.