If I wanted to use an RGB Negative 16x2 LCD+Keypad Kit from a breadboard instead of plugging it directly into the raspberry pi, is this possible? I would specifically need to know what pins need to be plugged into the header on the LCD plate. Is this possible and does the pin out information exist somewhere that I can refer to when hooking this up on the breadboard? The reason I'd like to do this is so that I can hook other things up to the Pi via the cobbler. I realize there are stacking headers, but I have a B+ and the header on the LCD plate is only 26.
Thanks.
Doug
Use RGB LCD Plate from Breadboard
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Use RGB LCD Plate from Breadboard
The schematic is linked on the downloads page of the tutorial.
The block in the center shows the connections: 5V, GND, SDA, and SCL
The block in the center shows the connections: 5V, GND, SDA, and SCL
- drohm
- Posts: 26
- Joined: Fri Aug 08, 2014 11:24 pm
Re: Use RGB LCD Plate from Breadboard
Awesome, thanks!
Please be positive and constructive with your questions and comments.