hooray!
now you can debug stuff a lot easier.
you're well on your way to being the 2nd owner of a minty.
i so proud i cry.
I HAVE BUILT A MINTY... And it doesn't work. poop.
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 56
- Joined: Wed Mar 23, 2005 10:31 am
Well, don't cry just yet. I plug in my Minty, slap a CF card in there, and open my terminal program. Turn minty on, and I get the following:
...Think I'll call it a night, but at least I'm encouraged to keep trying, instead of shelving the project
After that, nothing.Minty MP3! v1 3/25/2004
Resetting Card.. found CF card... Identifying CF..
...Think I'll call it a night, but at least I'm encouraged to keep trying, instead of shelving the project
-
- Posts: 2
- Joined: Fri Apr 08, 2005 4:42 pm
I too am building a minty and poop it doesn't work.
Couple of things.
1. just now ( after a few months of on and off work, I discovered that
the place that I got the pcb fabbed from as a prototype(pcbfabexpress).. had issues with the tolerances(probably had to do with clearances around the vias).. and as a result... on of the via's that goes to ground from the top layer from the ftdi chip isn't actually connected(1565,650).. I'm thinking I may try a wire bypass to a known good ground and see what happens.
2. I actually procured an oscilliscope and want to know about in what voltage range the crystal should be oscillating at/if you should be probing inside/outside the capacitors(if it matters)
1. just now ( after a few months of on and off work, I discovered that
the place that I got the pcb fabbed from as a prototype(pcbfabexpress).. had issues with the tolerances(probably had to do with clearances around the vias).. and as a result... on of the via's that goes to ground from the top layer from the ftdi chip isn't actually connected(1565,650).. I'm thinking I may try a wire bypass to a known good ground and see what happens.
2. I actually procured an oscilliscope and want to know about in what voltage range the crystal should be oscillating at/if you should be probing inside/outside the capacitors(if it matters)
Please be positive and constructive with your questions and comments.