Hi,
Just wanted to share that I've soldered one of your 1.8" TFTs onto a Proto Pi Plate and written code to display some info on it from the Pi. I've uploaded a video of it in action to http://www.flickr.com/photos/ngreatorex/7672743302/
The kernel module source is at https://github.com/ngreatorex/st7735fb if anyone is interested in doing the same. The module is based on the excellent work of Matt Porter at TI (see http://elinux.org/images/1/19/Passing_T ... Driver.pdf).
Cheers,
Neil
1.8" TFT and Proto Pi Plate with RPi
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
-
adafruit
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: 1.8" TFT and Proto Pi Plate with RPi
nice work! we'll blog this up!
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/