The new microsd adapter the cure to the blues!

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
osbock
 
Posts: 151
Joined: Tue Jan 23, 2007 1:12 pm

The new microsd adapter the cure to the blues!

Post by osbock »

On the same day, a friend and I both accidentally put a little pressure on the sd card when unplugging something, and "Snap!" went the holder. Fortunately I have a spare, and I'm trying to fix the other one, but this low profile dohicky is a must have in my opinion.
Image

slurp
 
Posts: 2
Joined: Sat Apr 02, 2011 2:10 pm

Re: The new microsd adapter the cure to the blues!

Post by slurp »

This does look good http://www.adafruit.com/products/966

I've not had a problem with the SD card but have an application where a smaller foot print would be helpful. How much does this card protrude from the Pi Board?

regards,
Colin

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: The new microsd adapter the cure to the blues!

Post by adafruit »

the SD adapter PCB sticks out about 2mm and the microsd sticks out another 2-3mm

slurp
 
Posts: 2
Joined: Sat Apr 02, 2011 2:10 pm

Re: The new microsd adapter the cure to the blues!

Post by slurp »

adafruit wrote:the SD adapter PCB sticks out about 2mm and the microsd sticks out another 2-3mm
Thanks.

Best regards,
Colin

danips
 
Posts: 1
Joined: Sun Sep 02, 2012 5:35 am

Re: The new microsd adapter the cure to the blues!

Post by danips »

adafruit wrote:the SD adapter PCB sticks out about 2mm and the microsd sticks out another 2-3mm
If you rotate the microSD holder 90º you will save the 2-3mm. And maybe the other 2 extra mm.
There's a cost at insert/remove ease, but I think some people may prefer that.

Image

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: The new microsd adapter the cure to the blues!

Post by adafruit »

we decided to go with the method we have - so that the card can be removed easily! but we'll consider the other way if enough people request it.

User avatar
westfw
 
Posts: 2008
Joined: Fri Apr 27, 2007 1:01 pm

Re: The new microsd adapter the cure to the blues!

Post by westfw »

There's a kickstarter project for a horizontal adapter: http://www.kickstarter.com/projects/443 ... i?ref=live

Although it looks like the poor (?) guy needs to make about 20x more boards than he originally planned on, so there may be some delay.

I think both versions have their advantages!

User avatar
osbock
 
Posts: 151
Joined: Tue Jan 23, 2007 1:12 pm

Re: The new microsd adapter the cure to the blues!

Post by osbock »

I personally like the Adafruit approach, as it can be used with a case. The other one would be difficult to remove without disassembling the case.
If you never need to change, it, I can see the advantages of the other approach.

BTW, I used the Adafruit adapter to fix a broken Pi. The other way wouldn't work, unless you truly never needed to change the card, since it's now glued in!

Here's the writeup:
http://baldwisdom.com/repairing-raspberry-pi-sd-holder/

User avatar
quantalume
 
Posts: 8
Joined: Mon Oct 08, 2012 11:22 pm

Re: The new microsd adapter the cure to the blues!

Post by quantalume »

This is a great little adapter. I don't know why they didn't use a microSD slot on the Pi to begin with, seeing how cramped for space the board is. Besides, microSD flash cards seem to be cheaper and more plentiful than their full-size brethren.

User avatar
richms
 
Posts: 558
Joined: Tue Jan 20, 2009 3:05 am

Re: The new microsd adapter the cure to the blues!

Post by richms »

When I asked it was an issue that the micro cards are easier to go missing in a classroom environment.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”