Using the Mini Thermal Printer
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit:

Using the Mini Thermal Printer

by jivings on Mon Oct 08, 2012 2:23 am

I've purchased a Mini Thermal Printer for my Raspberry Pi. The documnetation states:

This printer is ideal for interfacing with a microcontroller, you simply need a 3.3V to 5V TTL serial output from your microcontroller

Since the serial pins on the GPIO output at 3.3V I assumed that I could just connect the printer directly to the pins and it would just work without a protection circuit. Is that a naive assumption? What else do I need to do in order to use the printer?

Posts: 1
Joined: Mon Oct 08, 2012 2:21 am

Re: Using the Mini Thermal Printer

by adafruit on Mon Oct 08, 2012 4:03 pm

we have seen people get it working, the logic levels are fine to connect but there's a bit of code you need to interface with it and we don't have a tutorial, or recall where a tutorial could be found. you might have to google around!
User avatar
Posts: 11683
Joined: Thu Apr 06, 2006 3:21 pm
Location: nyc