Using USB MicroSD Card Reader ID:939 w/ older hardware

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
Pavel
 
Posts: 2
Joined: Fri Oct 05, 2012 12:07 am

Using USB MicroSD Card Reader ID:939 w/ older hardware

Post by Pavel »

Feedback only. I do have Occidentalis 0.2 running now.

Running Windows XP on older hardware & using the 4 GB MicroSDHC card ID:102, the USB MicroSD Card Reader ID:939 was indicating card capacity of only 56 MB. ImageWriter was writing over ~7% before quitting due to insufficient card capacity.

Using the same card ID:102, ImageWriter and a basic card reader picked up at a local shop, the full image was successfully written.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”