NTSC/PAL (Television) TFT Display - 3.5" Problem
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- orsty3001
- Posts: 3
- Joined: Wed Apr 29, 2009 1:02 pm
NTSC/PAL (Television) TFT Display - 3.5" Problem
A couple of weeks ago i got one of the 3.5" screens for my raspberry pi. It worked great for my project but today stopped working. It gives me no signs of life. I checked the power to the display and it's still 12 volts. I'm not sure what else to check on this screen or if it's got some kind of reset. I'm kind of at a dead end.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: NTSC/PAL (Television) TFT Display - 3.5" Problem
Try another video source to see if it is a signal or a display problem. If it still doesn't work, contact [email protected] with a link to this thread for a replacement.
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/