Is it possible to put MAX4466 from ada on RPi??

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
Andy0307
 
Posts: 3
Joined: Fri Dec 28, 2012 6:28 pm

Is it possible to put MAX4466 from ada on RPi??

Post by Andy0307 »

I was wondering if there are ways other than using a SPI interface to add this mic to the board since RPi does not support analog inputs.

thank you very much.

ennbr
 
Posts: 26
Joined: Sun Feb 12, 2012 12:17 pm

Re: Is it possible to put MAX4466 from ada on RPi??

Post by ennbr »

Take a look at (MCP3008 - 8-Channel 10-Bit ADC With SPI Interface - ID: 856)

Andy0307
 
Posts: 3
Joined: Fri Dec 28, 2012 6:28 pm

Re: Is it possible to put MAX4466 from ada on RPi??

Post by Andy0307 »

I was thinking of that. following that tut, but that was only for an analog control. so the plan is basically read in and use that to convert to digital? and thereafter use other driver programs to convert into audios?

Andy0307
 
Posts: 3
Joined: Fri Dec 28, 2012 6:28 pm

Re: Is it possible to put MAX4466 from ada on RPi??

Post by Andy0307 »

Would that be a good approach or any other ways? i'm totally new into this field. needed a lot suggestions. I'm a total noob

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”