Adafruit Pibow arrived - pieces are wrong

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
spbecker
 
Posts: 5
Joined: Wed Oct 24, 2012 1:47 pm

Adafruit Pibow arrived - pieces are wrong

Post by spbecker »

Hi,

Today I received one of the blue Adafruit Pibow cases (http://adafruit.com/products/1037), and upon assembling it noticed that the Pi wouldn't fit inside as one of the layers was hanging on the top of the audio out port, and there was no open slot for the GPIO ribbon cable. After some confusion I realized that I was missing slice number five, and instead had two number sixes...see attached photo.

-Steve
Attachments
pibow.jpg
pibow.jpg (119.21 KiB) Viewed 781 times

User avatar
adafruit_support_rick
 
Posts: 35092
Joined: Tue Mar 15, 2011 11:42 am

Re: Adafruit Pibow arrived - pieces are wrong

Post by adafruit_support_rick »

Sorry about that! Pleases contact [email protected] to arrange for a replacement. Please reference this thread!

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”