Hi,
Today I received one of the blue Adafruit Pibow cases (http://adafruit.com/products/1037), and upon assembling it noticed that the Pi wouldn't fit inside as one of the layers was hanging on the top of the audio out port, and there was no open slot for the GPIO ribbon cable. After some confusion I realized that I was missing slice number five, and instead had two number sixes...see attached photo.
-Steve
Adafruit Pibow arrived - pieces are wrong
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- spbecker
- Posts: 5
- Joined: Wed Oct 24, 2012 1:47 pm
Adafruit Pibow arrived - pieces are wrong
- Attachments
-
- pibow.jpg (119.21 KiB) Viewed 782 times
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Adafruit Pibow arrived - pieces are wrong
Sorry about that! Pleases contact [email protected] to arrange for a replacement. Please reference this thread!
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/