Adafruit Pi Box broken at assembly time

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
bobjects
 
Posts: 2
Joined: Wed Feb 06, 2013 3:29 pm

Adafruit Pi Box broken at assembly time

Post by bobjects »

Greetings Adafruit support staff! Today I received my laster etched transparent Pi box, http://www.adafruit.com/products/859 , which I ordered from newark.com. As I was assembling it, the flexible tab on one of the side pieces broke off under my thumb. I was not handling it roughly, and I was able to apply a similar pressure to the other side without breaking it.

What is Adafruit's replacement policy on this? I would not need a complete replacement kit, just the side with the HDMI connector cutout. Thanks!

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Adafruit Pi Box broken at assembly time

Post by adafruit »

just send an email to [email protected] and we'll take care of you instantly!

bobjects
 
Posts: 2
Joined: Wed Feb 06, 2013 3:29 pm

Re: Adafruit Pi Box broken at assembly time

Post by bobjects »

15 minute reply time. Awesome!

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”