PN532 with Raspberry Pi (visual and audio signals)

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
IamMattMoses
 
Posts: 1
Joined: Wed Feb 06, 2013 4:33 pm

PN532 with Raspberry Pi (visual and audio signals)

Post by IamMattMoses »

I have communication with the PN532 board with Raspberry Pi. I need the board to produce a 'BEEP' sound and flash three LEDs.
Is there a configuration or the ability for me to attach an indicator light and sound (like a beep) when a tag is scanned through the pn532 board or do I need to go through Pi for a simpler solution?

User avatar
adafruit_support_rick
 
Posts: 35092
Joined: Tue Mar 15, 2011 11:42 am

Re: PN532 with Raspberry Pi (visual and audio signals)

Post by adafruit_support_rick »

You would attach the lights and beeper to the Pi, rather than to the PN532 board.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”