I have been trying in vain to get the USB to TTL Serial Cable to work with my new Raspberry Pi. I have followed the tutorial and have been unable to get it to work.
In Mac OS X, 10.8.2, I have installed the Lion-compatible (said to also be Mountain Lion compatible) open-source PL-based drivers from http://www.xbsd.nl/2011/07/pl2303-seria ... -lion.html. I have used both minicom and ZOC, and the most I can get from the serial cable are endless garbage characters.
I tried with a Windows XP machine, and amazingly, I was able to receive from the Raspberry Pi (though oftentimes, the output would be mangled); however, I cannot send to the Raspberry Pi (typing has no effect, sending resets, etc.). It is as though the Pi is not actually receiving anything from the cable.
I am trying to determine whether the cable or the Pi is to blame. I can attempt tomorrow to connect the serial cable to a DB-9 plug and connect it to a linux box to see if that works.
I haven't put the RPi through any tests yet, other than booting into the OS (I have tested with both Wheezy and Occidental). The RPi has had some other issues with random shutdowns, etc., which leads me to wonder whether the RPi unit is to blame.
Any suggestions? Thank you for your help.
USB to TTL Serial Cable Not Working
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB to TTL Serial Cable Not Working
Are you sure that the baud-rate was the same on both ends?the most I can get from the serial cable are endless garbage characters.
Don't connect it directly to an RS-232 serial port. The RS-232 signal levels will damage the TTL cable.I can attempt tomorrow to connect the serial cable to a DB-9 plug and connect it to a linux box to see if that works.
Try a simple loop-back test. Connect the Tx to the Rx and see if what you type is echoed back.Any suggestions?
- brianp1
- Posts: 7
- Joined: Wed Jan 30, 2013 2:54 pm
Re: USB to TTL Serial Cable Not Working
Thank you adafruit_support for the reply.
I did confirm that both the serial terminal program and the getty server on the pi were both at 115200.
Thanks for the heads up that it is not an RS-232. I did not hook it up to anything (I was too lazy to find a serial plug anyhow).
I did the loopback test, and I cannot get any response, which seems to confirm that the transmit is not working. Interestingly, connecting it to the mac spewed an endless string of garbage characters, so there is an issue with the driver or the interface with the TTL cable.
It would appear that the TTL cable does not work properly. How do you suggest I further test or move forward?
Thank you for your assistance.
I did confirm that both the serial terminal program and the getty server on the pi were both at 115200.
Thanks for the heads up that it is not an RS-232. I did not hook it up to anything (I was too lazy to find a serial plug anyhow).
I did the loopback test, and I cannot get any response, which seems to confirm that the transmit is not working. Interestingly, connecting it to the mac spewed an endless string of garbage characters, so there is an issue with the driver or the interface with the TTL cable.
It would appear that the TTL cable does not work properly. How do you suggest I further test or move forward?
Thank you for your assistance.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB to TTL Serial Cable Not Working
Which model cable is this?
- brianp1
- Posts: 7
- Joined: Wed Jan 30, 2013 2:54 pm
Re: USB to TTL Serial Cable Not Working
It is the one that came with the Raspberry Pi Starter Kit https://www.adafruit.com/products/1014. I just received it a week ago, so it is the current version, I imagine.
Cheers
Cheers
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB to TTL Serial Cable Not Working
OK. Contact [email protected] with a link to this thread and ask for a replacement cable.
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/