I'm set to push the button and pick up a Pi but i have a question on the SD card.
There is this unit for $7.95
http://www.adafruit.com/products/102
And then this pre loaded unit for $15
https://www.adafruit.com/products/1121
The pre-loaded card is mentioned as ---- These microSDHC cards use the new speed “class" rating of Class 4 that guarantee a minimum Data transfer rate of 4MB/sec. We may ship a Sandisk or Kingston card, both are high quality and come with the same speed class rating.
So are these both class 4 cards ? If not maybe I should look locally .... Thanks for your help. I don't really need to pay to have it preloaded
MicroSD question
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: MicroSD question
All our cards are class 4
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/