LSM9DS0 is not working with lilypad
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- knsakib
- Posts: 12
- Joined: Tue Jul 22, 2014 6:33 pm
LSM9DS0 is not working with lilypad
Hi, LSM9DS0 Accelerometer is not working with lilypad. but it works with uno. i am using library from adafruit. what to do?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: LSM9DS0 is not working with lilypad
In what way is it not working? What are the symptoms?
Which version of the Lilypad?
Which version of the Lilypad?
- knsakib
- Posts: 12
- Joined: Tue Jul 22, 2014 6:33 pm
Re: LSM9DS0 is not working with lilypad
it is always the same value (all x, y, z are always 24539) whether i move it in any direction. i am using lily main board.
- anuj68
- Posts: 2
- Joined: Wed Aug 27, 2014 4:01 pm
Re: LSM9DS0 is not working with lilypad
I am having SAMMEE problem. When i connect LSM9DS0 to arduino UNO or arduino Duemilanove everything is working corectly.
However when i connect LSM9DS0 to arduino lillypad ATmega328 the values of accelerometer do not change regarless of motion of the IMU.
Please help if anyone has an idea why this is happening
However when i connect LSM9DS0 to arduino lillypad ATmega328 the values of accelerometer do not change regarless of motion of the IMU.
Please help if anyone has an idea why this is happening
- adafruit2
- Posts: 22144
- Joined: Fri Mar 11, 2005 7:36 pm
Re: LSM9DS0 is not working with lilypad
hmm lilypad is 8mhz and 3.3V - but we def have it working with the flora that is 8mhz and 3.3V. we dont know because we dont carry/stock the lilypad
- anuj68
- Posts: 2
- Joined: Wed Aug 27, 2014 4:01 pm
Re: LSM9DS0 is not working with lilypad
Turns out the reason IMU was not working properly with lilypad was because I was using 5v ftdi.
Seems this adafruit imu works only at 3.3 volts which is not supplied usually by lilypad
Seems this adafruit imu works only at 3.3 volts which is not supplied usually by lilypad
- vpapageo
- Posts: 2
- Joined: Thu Mar 10, 2016 4:00 am
Re: LSM9DS0 is not working with lilypad
Well, I am using an FTDI with 3.3V for the LilyPad and I am facing problems as well...
I have connected SCL,SDA with A5,A4 as for the Arduino Uno but I don't get any changes for x,y axis rotation.
However, it does work for rotation around the z axis
Any ideas?
I have connected SCL,SDA with A5,A4 as for the Arduino Uno but I don't get any changes for x,y axis rotation.
However, it does work for rotation around the z axis
Any ideas?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: LSM9DS0 is not working with lilypad
Sounds like a defective sensor. Please email [email protected] with a link to this thread for a replacement
Please be positive and constructive with your questions and comments.