Accented notes are just short pops!

x0x0x0x0x0x

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
User avatar
mmm
 
Posts: 517
Joined: Tue Apr 24, 2012 1:51 am

Re: Accented notes are just short pops!

Post by mmm »

r.odent wrote:The rightmost two pins of VR6 (looking from the top of the main board) seem to be joined -- are they supposed to be? If not, can I just cut the rightmost pin as it doesn't seem to be connected anywhere else?
Please clarify - are you looking from the component side or the LED/switches side?

If it's the latter then it is the way it is supposed to be.

I'll look into your problem when time permits.

User avatar
r.odent
 
Posts: 9
Joined: Sun Jul 01, 2012 8:44 pm

Re: Accented notes are just short pops!

Post by r.odent »

Thanks, it's on the LED/button side, and looking at a photo of the PCB I found out what you just told me. The pot seems wired up correctly and there seem to be no bad joints.

User avatar
mmm
 
Posts: 517
Joined: Tue Apr 24, 2012 1:51 am

Re: Accented notes are just short pops!

Post by mmm »

So we need to have a look at the other suspects here.

Please check (visually) C62, measure R117, and measure if D26, D28 and D29 are ok.

Locked
Please be positive and constructive with your questions and comments.

Return to “General x0xing”