Hi All
I was happily playing with my hardware setup of x0x (willzyx x0x - firmware 1.05) , 606 and Bass station rack today and the midi out on the x0x suddenly stopped working.
My chain was this : 606 outputting dinsync to din in on x0x. x0x midi out sending to Bass Station midi in.
All was fine and then suddenly the midi stoped going out from the x0x and the bass station sang no more.
Have check the Bass station with midi in from my computer ; no problem so it has to be the x0x midi out is the problem.
I updated to Sokkos 2.0 after this hapened but still no effect on the midi problem; just the same. no midi output from x0x.
any ideas people ?
Midi output has stopped working
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
-
- Posts: 93
- Joined: Tue Nov 08, 2011 11:33 am
Re: Midi output has stopped working
Has the midi out channel of the x0x changed?
Check the midi-out of the x0x with a midi-monitor-program!
Check the midi-out of the x0x with a midi-monitor-program!
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Midi output has stopped working
midisync is not a channel message, but still a midi monitor is useful
- cleaninglady
- Posts: 38
- Joined: Thu Jun 14, 2012 6:33 am
Re: Midi output has stopped working
Found this in the manual for Sokkos 1.91 :
"Another use of the bank knob is to change the MIDI address of the device in MIDI Play or Keyboard mode."
Do you think this is my problem , i was playing around a bit with the controls the day it happened.
If so , what is the method to change it back to channel one for MIDI ?
"Another use of the bank knob is to change the MIDI address of the device in MIDI Play or Keyboard mode."
Do you think this is my problem , i was playing around a bit with the controls the day it happened.
If so , what is the method to change it back to channel one for MIDI ?
- cleaninglady
- Posts: 38
- Joined: Thu Jun 14, 2012 6:33 am
Re: Midi output has stopped working
someone didn't plug the midi cable back in yesterday.
all good , just needed the midi channel reassigned in 'midi play' or 'keyboard' mode.
all good , just needed the midi channel reassigned in 'midi play' or 'keyboard' mode.
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Midi output has stopped working
in midi play mode - the BANK knob sets the input midi channel (it should be displayed via the BANK LEDs)
- cleaninglady
- Posts: 38
- Joined: Thu Jun 14, 2012 6:33 am
Re: Midi output has stopped working
Cheers antto!
Please be positive and constructive with your questions and comments.