has any one got any experience whit this servic???
http://www.seeedstudio.com/depot/open-s ... 64_12.html
20 usd for 10 pcb's. Isent that crazy cheep
seed studio PCB
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 8
- Joined: Sun Jul 04, 2010 2:05 pm
Re: seed studio PCB
Yes, it's a great deal.
I used them a few times, quality is pretty good.
I used them a few times, quality is pretty good.
- macegr
- Posts: 293
- Joined: Fri Apr 04, 2008 4:46 pm
Re: seed studio PCB
They're good, I've put a few $K through seeedstudio. If you don't spring for the e-testing service then make sure your PCB is easy to visually check for any etch problems. I'd say maybe 2% have some kind of fault.
-
- Posts: 60
- Joined: Sat Mar 29, 2008 3:01 pm
Re: seed studio PCB
Nice thaks. I'll try them for my next pcb
-
- Posts: 57
- Joined: Sun Jun 20, 2010 7:53 am
Re: seed studio PCB
Seems ideal, about the same price as Batch but with quicker turnaround. Only problem is the 1 design rule, I wouldnt mind paying a little extra to have 2-3 designs per board, I dont need 5 of the same board
How are they at spotting panelisation?
How are they at spotting panelisation?
- laen
- Posts: 7
- Joined: Tue Jul 27, 2010 12:38 am
Re: seed studio PCB
You might consider joining in the DorkbotPDX PCB Order (http://www.dorkbotpdx.org/wiki/pcb_order). It's only once or twice a month, but the turnaround is quick (mailed to you in under 9 days), pretty cheap, and multiple designs isn't a problem. The next one is August 2nd.
(fair disclosure: I run the thing)
(fair disclosure: I run the thing)
-
- Posts: 57
- Joined: Sun Jun 20, 2010 7:53 am
Re: seed studio PCB
Looks good, I just need to figure out the panelization. The august 2nd date is good for me too, means I should be able to get some protos in my hands within weeks(UK).
- laen
- Posts: 7
- Joined: Tue Jul 27, 2010 12:38 am
Re: seed studio PCB
Don't worry about panelization if you don't want to. Since there's no fees beyond a straight square inch charge, there's no penalty for just submitting multiple designs.Philly wrote:Looks good, I just need to figure out the panelization. The august 2nd date is good for me too, means I should be able to get some protos in my hands within weeks(UK).
Please be positive and constructive with your questions and comments.