by CapoLucky on Fri Jul 06, 2012 1:38 am

Hi Masters of the Tech Uni. I don't need to mention that I'm new to Arduino and Linux. Do I ?
I would like to set up a CCTV system using Arduino and perhaps Raspberry Pi as a www server. The idea is to set 3 micro cameras outside and manage/access them through a website. Any idea/help would b highly appreciated. Adafruit guys have u thought about setting up a tech university or summer classes? Cheers
CapoLucky
 
Posts: 1
Joined: Fri Jul 06, 2012 1:25 am

by thefatmoop on Mon Jul 09, 2012 11:40 pm

see if you can connect a few webcams up and find how to stream that on a webserver the raspi would host. This would all be done on the raspi and the raspi could control servos or motors to move the cameras via the gpio port. Don't really need an arduino

If you're new to the field just be very careful with those gpios to ensure you don't draw too much current or have a high voltage going into it (above 3.3v)
User avatar
thefatmoop
 
Posts: 317
Joined: Tue Aug 19, 2008 3:36 pm