We just got a Bluetooth chip to communicate with and Arduino and got TX to an Android.
An ipad could not pick it up but my phone did (Motarola Quantico - no app here)
Anyway.
I've been told Zigbee is the next wave of communication and is better than Bluetooth.
I notice the Xbee devices on Adafurit by frowned at the cost. We can find Bluetooth adapters for
Arduino for about $10
I'd appreciate some feedback.
I have no idea which would be a better route to follow for wireless communications to an Arduino?
Bluetooth or XBEE?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88154
- Joined: Sat Feb 07, 2009 10:11 am
Re: Bluetooth or XBEE?
Bluetooth uses a 1:1 master/slave pairing and the range is relatively limited. XBee modules can be set up for multi-way peer-peer, or even mesh networking. And the range is considerably longer than bluetooth - especially with the Pro models.
- 1885
- Posts: 94
- Joined: Sun May 24, 2009 2:12 am
Re: Bluetooth or XBEE?
Thank you so much. Now I really am asking to be spoon fed on this one.adafruit_support wrote:Bluetooth uses a 1:1 master/slave pairing and the range is relatively limited. XBee modules can be set up for multi-way peer-peer, or even mesh networking. And the range is considerably longer than bluetooth - especially with the Pro models.
What do I need for a client host set up with an adruino?
- adafruit_support_bill
- Posts: 88154
- Joined: Sat Feb 07, 2009 10:11 am
Re: Bluetooth or XBEE?
Client host as in Arduino to PC? For that you would need:What do I need for a client host set up with an adruino?
2 XBee modules (I'd recommend Series 1 since they are easier to configure)
1 XBee Adapter Kit.
1 USB XBee Adapter kit (or another XBee Adapter Kit and an FTDI cable to connect to the PC)
Some hook-up wire to connect the adapter to the Arduino.
https://www.adafruit.com/index.php?main ... rch&q=xbee
Please be positive and constructive with your questions and comments.