Good evening! I purchased your 315MHz remote keyfob but I would rather not have to use one of the receivers you're selling along with it. I already have a 315MHz receiver soldered into a project I'm working on.
I bought the remote to replace the transmitter I made which was much too large for what I wanted. My home-made receiver, however, is just fine.
Basically, I just want to know what information all four of the buttons on the transmitter are actually sending, so I know what to program my receiver to look for.
315MHz remote
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- zener
- Posts: 4567
- Joined: Sat Feb 21, 2009 2:38 am
Re: 315MHz remote
The decoder protocol needs to match for that to work. About 22 threads down I put the link to the fob encoder data sheet (last post of thread). Barring that you could look at the raw data if you have access to that.
Please be positive and constructive with your questions and comments.