315MHz remote

by xb4r7x on Fri Feb 15, 2013 8:20 pm

Good evening! I purchased your 315MHz remote keyfob but I would rather not have to use one of the receivers you're selling along with it. I already have a 315MHz receiver soldered into a project I'm working on.

I bought the remote to replace the transmitter I made which was much too large for what I wanted. My home-made receiver, however, is just fine.

Basically, I just want to know what information all four of the buttons on the transmitter are actually sending, so I know what to program my receiver to look for.
xb4r7x
 
Posts: 1
Joined: Fri Feb 15, 2013 8:14 pm

Re: 315MHz remote

by Zener on Fri Feb 15, 2013 9:29 pm

The decoder protocol needs to match for that to work. About 22 threads down I put the link to the fob encoder data sheet (last post of thread). Barring that you could look at the raw data if you have access to that.
Zener
 
Posts: 2458
Joined: Sat Feb 21, 2009 1:38 am