LSM303 accelerometer + magnometer with Livid instruments Brain Jr. ?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- jupitor
- Posts: 3
- Joined: Wed Jan 16, 2013 4:33 pm
LSM303 accelerometer + magnometer with Livid instruments Brain Jr. ?
I have a Livid instruments brain jr. (anologue + digital input to midi usb output) And I would like to connect my adafruit LSM303 accelerometer magnometer out puts to affect midi control change values... I am building a controller that has buttons and potentiometers, and a fader. The info from these is plugged in and turned into midi by the brain Jr. It would stand to reason that I should be able to use the X, Y, Z axis and Compass info to add tilt and roll affects to my midi controller.. Do I need to add a separate arduino to read the LSM303 data? - Jupitor..
- zener
- Posts: 4567
- Joined: Sat Feb 21, 2009 2:38 am
Re: LSM303 accelerometer + magnometer with Livid instruments Brain Jr. ?
Well, the LSM303 speaks I2C and it appears the Livid board doesn't. So in that case you would need a translator between the two. I guess you could use analog writes on the Arduino to make voltages to send to the Livid analog inputs. Someone else might have a better idea.
- jupitor
- Posts: 3
- Joined: Wed Jan 16, 2013 4:33 pm
- jupitor
- Posts: 3
- Joined: Wed Jan 16, 2013 4:33 pm
Re: LSM303 accelerometer + magnometer with Livid instruments Brain Jr. ?
Mmmm, the brain Jr. Does have an I2C port just like the LMS303 accelerometer... I need to look into this though I know nothing bout no I2C...?
- zener
- Posts: 4567
- Joined: Sat Feb 21, 2009 2:38 am
Re: LSM303 accelerometer + magnometer with Livid instruments Brain Jr. ?
I didn't see that on any of the spec sheets I looked up. But I don't know anything about the Livid product.
Please be positive and constructive with your questions and comments.