Hello,
I just purchased Adafruit Flora device, among other products to re-create the LED Firewalker for my own use.
I just realized that the Arduino USB cable i have isnt' the correct cable to transfer the program from my pc to the device.
I found this cable on this site: USB Cable - Standard A-B - 3 ft/1m
Is that the correct USB cable to connect to my pc to transfer code?
As an FYI, I have a 64 Bit windows 7 pc with the Arduino1.0.5 IDE installed. Please let me know if that cable above is correct or not so I can purchase it to complete the projects I'd like to do.
Thanks.
What is the prefered USB cable type to connect to Adafruit F
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- cad83
- Posts: 13
- Joined: Sun Mar 30, 2014 1:28 pm
- cad83
- Posts: 13
- Joined: Sun Mar 30, 2014 1:28 pm
Re: What is the prefered USB cable type to connect to Adafru
Also the product type just in case is: ID: 260
http://www.adafruit.com/products/260
Again please let me know if that usb cable is the correct one to get. Thanks.
http://www.adafruit.com/products/260
Again please let me know if that usb cable is the correct one to get. Thanks.
- adafruit_support_bill
- Posts: 88154
- Joined: Sat Feb 07, 2009 10:11 am
Re: What is the prefered USB cable type to connect to Adafru
The connector on the Flora is a "Mini-B" so you need an A to Mini B
http://www.adafruit.com/products/899
or
http://www.adafruit.com/products/260
http://www.adafruit.com/products/899
or
http://www.adafruit.com/products/260
Please be positive and constructive with your questions and comments.