gfx

[qman]

can't find library in gfx download from github, after download and unzip there is no library

[adafruit_support_bill]

This link should work for you: https://github.com/adafruit/Adafruit-GF ... master.zip

[qman]

clicked unzipped opened NO library

[adafruit_support_bill]

What operating system are you using? It works here on Windows 7, Windows 8.1 and Mac OSX

[qman]

/Users/Roger/Downloads/Adafruit-GFX-Library-master-4/Adafruit_GFX.cpp
/Users/Roger/Downloads/Adafruit-GFX-Library-master-4/Adafruit_GFX.h
/Users/Roger/Downloads/Adafruit-GFX-Library-master-4/glcdfont.c
these are what I see on mac osx

[adafruit_support_bill]

Those are the library files.

Safari by default will unzip files for you. There are options to fix that behavior. https://discussions.apple.com/message/17593494#17593494

[qman]

If those are the codes why aren't they in a library?

[adafruit_support_bill]

Safari has unzipped them for you. If you look in the repository, those are the files. https://github.com/adafruit/Adafruit-GFX-Library

[qman]

done the same as all other downloads does not show up in my sketch, examples or library. The only way to see it is press open... and it is there but not as file able to open

[adafruit_support_bill]

You have to install it. See this guide for details: http://learn.adafruit.com/adafruit-all- ... nstall-use

[qman]

I understand how Have done it a number of time It does not show up in my library tried safari,chrome, and firefox Will not open

[qman]

please helppp!

[tastewar]

Have you Quit out of Arduino (all windows!) and started it up again? It only scans the Library folder when it starts up...

[qman]

yes the folders contents does not contain a library just the cpp h and c plus license and read me txt folder as like others and when dragged into arduino folder the files don't show up.

[adafruit_support_bill]

the folders contents does not contain a library just the cpp h and c plus license and read me txt folder

The cpp and h files ARE the library!
If Safari has removed the folder, create one and put those files inside it. Then install as directed by the guide linked above.