Hello,
I am having some issues with the 2.8 TFT w/ Touch Screen for the Raspberry Pi.
1. after installing driver for the screen the raspberry Pi does not start up as you see on similar projects on youtube, I do not get the normal start-up sequence with the green okays. is this how it suppose to start up ?
http://www.youtube.com/watch?v=S32pUs7Rq8U
2. I am unable to run the x-calibration utility mentioned in the install tutorial.
3. it does not auto-start, startx after setting it up for it, in the config utility, when installing raspian. But it does so if I attach a normal screen through HDMI.
I'am only able to run things from through SSH in terminal. this way I can run startx and get the touch screen to work, but I need to turn the image 90 degr. for my project so I need the x-calibration too to setup the touch screen configuration file.
Lets start here and I'll post my next troubles when we get so thus far ;)
Thanks
Thomas
Problems w/ 2.8" touch screen, Raspberry PI
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Problems w/ 2.8" touch screen, Raspberry PI
The display in that video doesn't look like anything we sell. You'll probably need to talk to the vendor for information on how it works.
-
- Posts: 3
- Joined: Sun Apr 13, 2014 6:02 pm
Re: Problems w/ 2.8" touch screen, Raspberry PI
the 2.8 inch tft w/touch screen I bought it from your web-shop, the video is just an example, sorry should have specified.
The problems remain
The problems remain
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Problems w/ 2.8" touch screen, Raspberry PI
How far do you get through the instructions on this page of the tutorial before things stop working as expected?
https://learn.adafruit.com/adafruit-pit ... -calibrate
https://learn.adafruit.com/adafruit-pit ... -calibrate
Please be positive and constructive with your questions and comments.