Hi. I have a few Sharp 128x128 memory displays (LS013B7DH03) that after some tweaks I could manage to make it work using yours 96x98 breakout board (ID:1393) and an Arduino Uno. The problem is that the original 96x96 is strongly attached to the board, making it impossible to swap permanetly the module without breaking the original 96x96 part. All tests I did keeping the display hanging from its connector.
Would you be able to provide a couple of breakout like this without the LCD attached? I love this mirror like display but the higher resolution and contrast from the black LCD is much more appropriate to my application.
My Best regards,
André Wiermann
Sharp Memory Display
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- andre_w
- Posts: 3
- Joined: Fri Oct 18, 2013 2:07 pm
Re: Sharp Memory Display
...yours 96x96 breakout board (ID:1393)...
...permanently...
Sorry for the typos.
...permanently...
Sorry for the typos.
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Sharp Memory Display
We don't sell many Memory Displays, so we don't have any plans to add new ones to the shop.
You're welcome to use our design files for your own purposes though: https://github.com/adafruit/Adafruit-Sh ... ry-Display
You're welcome to use our design files for your own purposes though: https://github.com/adafruit/Adafruit-Sh ... ry-Display
- andre_w
- Posts: 3
- Joined: Fri Oct 18, 2013 2:07 pm
Re: Sharp Memory Display
OK. I understand.
I will see how much will cost to make just a couple of breakouts like this, here (in Brazil).
Depending on the value, may be better to buy a couple of boards from Adafruit and to extract/sacrifice (argh!) the original 96x96 module.
But it is really nice of you to share the docs with the customers!
Thank you for your kindness and support.
Regards,
André Wiermann
I will see how much will cost to make just a couple of breakouts like this, here (in Brazil).
Depending on the value, may be better to buy a couple of boards from Adafruit and to extract/sacrifice (argh!) the original 96x96 module.
But it is really nice of you to share the docs with the customers!
Thank you for your kindness and support.
Regards,
André Wiermann
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: Sharp Memory Display
You can buy breakout boards for the Sharp Memory LCD's on Tindy.com
Please be positive and constructive with your questions and comments.