Hello I have a question about what I will need to connect this small camera to the lcd panel
http://www.amazon.com/Power-Cables-Came ... molex+plug
http://www.amazon.com/Generic-700TVL-Bo ... lor+Camera
. Here are some links that may help you ease my response. The camera will have 4 instead of 3 from the link below . The lcd panel has 50pin . Any help would be nice.Need help with project
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Need help with project
Is the LCD one you bought from us?
-
- Posts: 19
- Joined: Sat Dec 28, 2013 11:15 pm
Re: Need help with project
No, but if necessary i would find a way to buy one from you.
-
- Posts: 19
- Joined: Sat Dec 28, 2013 11:15 pm
Re: Need help with project
I got it from a tablet I had
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Need help with project
To make that display work, you'd need to find a datasheet for it.
Since it uses a flex cable, I'd guess that it doesn't accept data as HDMI or NTSC/PAL formats, which the camera probably provides as output. You'd need some kind of microcontroller to convert signals from the camera into a format the display can understand.
You'd need more than an Arduino to do that.. the Arduino doesn't have enough memory and its clock is too slow to do real-time video processing.
Since it uses a flex cable, I'd guess that it doesn't accept data as HDMI or NTSC/PAL formats, which the camera probably provides as output. You'd need some kind of microcontroller to convert signals from the camera into a format the display can understand.
You'd need more than an Arduino to do that.. the Arduino doesn't have enough memory and its clock is too slow to do real-time video processing.
Please be positive and constructive with your questions and comments.