WebIDE not showing
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

WebIDE not showing

by sonite on Mon Jan 14, 2013 10:13 am

Does this work with a soft float system?
I try to connect to address: http://192.168.1.104:3000/ and nothing happens?

I tried to restart at the Rasp and no problem there. I also tried to ping with success.
sonite
 
Posts: 2
Joined: Mon Jan 14, 2013 10:12 am

Re: WebIDE not showing

by delerious on Thu Jan 17, 2013 7:07 pm

don't know about soft float, but I finally managed to get in without using the port number (3000).
http://192.168.1.60 in my case.
delerious
 
Posts: 12
Joined: Thu Nov 22, 2012 4:09 pm

Re: WebIDE not showing

by sonite on Fri Jan 18, 2013 4:46 am

delerious wrote:don't know about soft float, but I finally managed to get in without using the port number (3000).
http://192.168.1.60 in my case.


Thanks, I tried that also. It might be a problem with the soft float drives!
sonite
 
Posts: 2
Joined: Mon Jan 14, 2013 10:12 am

Re: WebIDE not showing

by der-eddy on Sat Jan 19, 2013 3:45 pm

On the setup the scripts will try to use the Port 80 (standard) for the webide
if this port is occupied the script will use the Port 3000 instead
der-eddy
 
Posts: 1
Joined: Tue Jan 08, 2013 9:27 am

Re: WebIDE not showing

by MrHermit on Sat Jan 26, 2013 1:59 pm

I was having issues as well and was able to connect by using just the IP address and not identifying the port.
J
MrHermit
 
Posts: 2
Joined: Fri Dec 28, 2012 1:32 pm