How to test Pi Cobbler

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
tursiops
 
Posts: 2
Joined: Fri Dec 14, 2012 7:45 pm

How to test Pi Cobbler

Post by tursiops »

Dear support,

I have soldered the project and looks OK but is there way to electronically test the Cobbler and see if all pins are correctly available?

Thanks
Jaap

User avatar
adafruit_support_bill
 
Posts: 88088
Joined: Sat Feb 07, 2009 10:11 am

Re: How to test Pi Cobbler

Post by adafruit_support_bill »

With a board like the Cobbler, visual inspection can detect most problems. It can even detect problems that a test-jig would not, such as a cold joint that might be conductive now but is likely to fail in the future.

If you post clear photos of the front & back, we'll check it over from here.

tursiops
 
Posts: 2
Joined: Fri Dec 14, 2012 7:45 pm

Re: How to test Pi Cobbler

Post by tursiops »

Thanks I will put some photo's on, btw, I have launched my first project with the gmail notifier successfully which is really great and fanstastic to see it working with your instructions. I was for about 25 years ago I took the solderkit in my hands but is now rewarded :lol: with the glowing red and green leds 8) You guys do fantastic in making the mindset work and ideas to be generated.

Once again Super Thanks
Jaap

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”