luna exp vision will not place
Moderators: adafruit_support_bill, adafruit

luna exp vision will not place

by piecal on Mon Oct 10, 2011 4:23 pm

I can't place a cap or resistor with LV set for 1. I tried to teach the part in teaching mode but all I get are the cross hairs and no red box and I can't get the part to rotate. I tried to follow the book to test nozzle height and operation but it said to use F command which does nothing. please help.

Posts: 1
Joined: Mon Oct 10, 2011 4:10 pm

Re: luna exp vision will not place

by ktownsend on Sun Oct 16, 2011 2:04 pm

I'm not sure if this is encouragement or not, but it took me at least a month or two to start reliably placing stuff and understand all the quirks in the machine and SW. The manual has some good information in there, but I learned everything useful from the wiki and trial and error. Unfortunately I'm in the middle of moving and haven't touched the (disassembled) PnP in about 2 months so I can't fire up the SW to help. :(

After ou modify the parts like, say, changing the rotation ... are you pressing "ENTER" in the box that you modified the values for? If you don't press enter on the row it won't persist that changed data.

User avatar
Posts: 336
Joined: Thu Nov 05, 2009 1:18 am